JOKISCH MIGMA TANO DPR MK

In Stock

Designed for severe to severest machining for a variety of materials.

Imate vprašanje? Vprašajte strokovnjaka.

(+386) 41 705 509 Vedno dosegljivi

Najboljše cene

Cenovno kompetentni!

Zagotovljena ustreznost

Preverjeno!

Dosegljivi strokovnjaki

Vedno na voljo!

Brezskrbna dobava

Hitra dostava!

Opis

JOKISCH MIGMA TANO DPR MK

Designed for severe to severest machining for a variety of materials.

Free of secondary amines – free of formaldehyde

Properties: stable in hard water, pressure stable

APPLICATION
PROPOSED CONCENTRATION
Universally applicable water soluble cooling lubricant, excellent suited for severe to severest
processing. Of particular note here is the problem-free machining of aluminum and the
demanding machining of high-alloy steels and titanium.
Light machining 1:20
Severe machining 1:15
Severest machining 1:10

STORAGE
Storage temperature: 5 – 40°C
Storage time: 12 months
Date: 25.07.2022

CHARACTERISTICS
Formulated with low aromatic, highly refined base oils. Special emulsifiers ensure an excellent
performance spectrum and high corrosion protection even at low concentrations.
Particularly selected AW additives allow machining with high cutting speeds. Long term stability
against bacteria, also suited for internally cooled tools and high pump pressures.

 

UNIT METHOD

Kin. viscosity at 20°C mm²/s ASTM D 7042 110
Density at 20°C g/cm³ DIN EN ISO 12185 0,99
pH-value at 20°C – DIN 51369 9,5
Corrosion protection note 0 – DIN 51360 5% = 0
Refractometerindex – – 1,7
Mineral oil content % – 35 %

TECHNICAL SPECIFICATIONS
This information is based on the latest state of knowledge. They are intended to describe the
product and thus do not have the meaning to assure certain properties. A liability can not be
derived from this.

 

TECHNICAL DATA SHEET